This is a highly adaptable outline for how design thinking could be introduced to your learners over a multi-day project. This plan works best if students are divided up into groups of 3-4 for all work except the introduction to each concept at the beginning of class. Learners should stay in the same group for the whole class.

Includes pre-work links, general instructions to guide planning for each day, design thinking student handouts, and multi-grade NGSS standards linked to design thinking.

Student teams create laparoscopic surgical robots designed to reduce the invasiveness of diagnosing endometriosis and investigate how the disease forms and spreads. Using a synthetic abdominal cavity simulator, students test and iterate their remotely controlled, camera-toting prototype devices, which must fit through small incisions, inspect the organs and tissue for disease, obtain biopsies, and monitor via ongoing wireless image-taking. Note: This activity is the core design project for a semester-long, three-credit high school engineering course. Refer to the associated curricular unit for preparatory lessons and activities.

Students create model elevator carriages and calibrate them, similar to the work of design and quality control engineers. Students use measurements from rotary encoders to recreate the task of calibrating elevators for a high-rise building. They translate the rotations from an encoder to correspond to the heights of different floors in a hypothetical multi-story building. Students also determine the accuracy of their model elevators in getting passengers to their correct destinations.

This activity engages students with the concept of Direct Air Capture. Students watch an engaging film, participate in a reading and writing activity, and then model carbon dioxide adsorption/desorption in an exciting lab.

Following the steps of the iterative engineering design process, student teams use what they learned in the previous lessons and activity in this unit to research and choose materials for their model heart valves and test those materials to compare their properties to known properties of real heart valve tissues. Once testing is complete, they choose final materials and design and construct prototype valve models, then test them and evaluate their data. Based on their evaluations, students consider how they might redesign their models for improvement and then change some aspect of their models and retest aiming to design optimal heart valve models as solutions to the unit's overarching design challenge. They conclude by presenting for client review, in both verbal and written portfolio/report formats, summaries and descriptions of their final products with supporting data.

In this capstone course, students will use new and previous knowledge about drug delivery and biopharmaceutics, to design an innovation. Throughout the course students will engage in learning opportunities related to real-world scenarios in drug delivery, gain a better understanding of the anatomy and physiology related to drug delivery, and participate in a self-directed project to solve a fictitious problem. This learning tool will guide students through the process of understanding real-world applications of drug delivery and how drug delivery is applied to treating infectious diseases. DDF’s innovation project is aligned with NGSS and Common Core standards in math and ELA core curriculum subject areas. The learning activities, final project, and mid-unit assessments are provided to the teacher and students in the form of eLearning readings, quizzes, interactive tools, student response sheets, and presentation outlines. Students using this module should find success in self-directed learning, though they may use additional resources in the community, the guidance of teachers, the advice of scientists or biomedical professionals at DDF, or the knowledge presented in scientific literature to help them achieve their goal; though this module should provide most of the tools they will need for guidance. For more information on in-person learning experiences, please contact our DDF eLearning Project Manager, Lindsay Malcolm: lmalcolm@tsrlinc.com

In this virtual professional development opportunity designed for teachers, participants will have a chance to authentically engage with activities and experts as they grow their understanding of how climate change has and will impact their community. Teachers analyze and interpret recent climate science data and progress understanding on the most salient climate change indicators in Washington. Additionally, teachers explore the efforts to conserve and protect a local species, its cultural significance and how these efforts are indicative of a greater effort to address climate change. Teachers leave this training with increased preparedness to leverage a local species or climate change impact in their classroom to spur action in their community. Contact EarthGen at info@earthgenwa.org for more information.

Students act as Mars exploratory rover engineers, designing, building and displaying their edible rovers to a design review. To begin, they evaluate rover equipment and material options to determine which parts might fit in their given NASA budget. With provided parts and material lists, teams analyze their design options and use their findings to design their rovers.

As part of the engineering design process to create testable model heart valves, students learn about the forces at play in the human body to open and close aortic valves. They learn about blood flow forces, elasticity, stress, strain, valve structure and tissue properties, and Young's modulus, including laminar and oscillatory flow, stress vs. strain relationship and how to calculate Young's modulus. They complete some practice problems that use the equations learned in the lesson mathematical functions that relate to the functioning of the human heart. With this understanding, students are ready for the associated activity, during which they research and test materials and incorporate the most suitable to design, build and test their own prototype model heart valves.

Students are presented with a hypothetical scenario that delivers the unit's Grand Challenge Question: To apply an understanding of nanoparticles to treat, detect and protect against skin cancer. Towards finding a solution, they begin the research phase by investigating the first research question: What is electromagnetic energy? Students learn about the electromagnetic spectrum, ultraviolet radiation (including UVA, UVB and UVC rays), photon energy, the relationship between wave frequency and energy (c = λν), as well as about the Earth's ozone-layer protection and that nanoparticles are being used for medical applications. The lecture material also includes information on photo energy and the dual particle/wave model of light. Students complete a problem set to calculate frequency and energy.

In this activity learners work in pairs or small groups to evaluate energy use in their school and make recommendations for improved efficiency. Students create and use an energy audit tool to collect data and present recommendations to their class. Further communication at the school and district level is encouraged.

This document is a history of the challenges of starting an FTC Robotics Program as a class (as opposed to a club). The intended audience includes anyone who is thinking of starting an FTC Robotics program whether class or club. The reason “FTC” is specifically mentioned is that involvement with a major national program has many positive (and negative) aspects. The goal of this document is to provide the reader a compendium of all the problems (and posited solutions) we encountered.

This hands-on activity introduces students to the process of fermenting different carbohydrate sources into ethanol. Teachers demonstrate yeasts' inability to metabolize certain food sources.

To become familiar with the transfer of energy in the form of quantum, students perform flame tests, which is one way chemical engineers identify elements by observing the color emitted when placed in a flame. After calculating and then preparing specific molarity solutions of strontium chloride, copper II chloride and potassium chloride (good practice!), students observe the distinct colors each solution produces when placed in a flame, determine the visible light wavelength, and apply that data to identify the metal in a mystery solution. They also calculate the frequency of energy for the solutions.

Students are presented with an engineering challenge that asks them to develop a material and model that can be used to test the properties of aortic valves without using real specimens. Developing material that is similar to human heart valves makes testing easier for biomedical engineers because they can test new devices or ideas on the model valve instead of real heart valves, which can be difficult to obtain for research. To meet the challenge, students are presented with a variety of background information, are asked to research the topic to learn more specific information pertaining to the challenge, and design and build a (prototype) product. After students test their products and make modifications as needed, they convey background and product information in the form of portfolios and presentations to the potential buyer.

In this activity, students listen to a podcast and then investigate causes of and solutions to food waste, plant-based recipes to get excited about, and the diversity and variety of heirloom foods.

Working as engineering teams in this introductory pneumatics lab, students design and build working pneumatic (air-powered) systems. The goal is to create systems that launch balls into the air. They record and analyze data from their launches.

The purpose of the resource is to introduce students to Landsat images and how to identify the land cover types within those images.

How do greenhouse gases affect the climate? Explore the atmosphere during the ice age and today. What happens when you add clouds? Change the greenhouse gas concentration and see how the temperature changes. Then compare to the effect of glass panes. Zoom in and see how light interacts with molecules. Do all atmospheric gases contribute to the greenhouse effect?

How can we Design Cattle to Better Meet Human Needs?

In this high school Storyline unit on genetics and heredity, students are introduced to ‘SuperCows’. As they explore the vast variety of cattle breeds, students discover that cattle are specialized for different purposes and while similar, the ‘SuperCows’ are clearly unique. Students wonder what caused this diversity and specificity which leads to investigations about the role of inheritance, DNA and proteins.