Search Results (176)

View
Selected filters:
  • Delft University OpenCourseWare
ABILITY - Visualizing the Unimaginable - TU Delft OCW
Conditions of Use:
Remix and Share
Rating

Students and professionals in science, design and technology have to develop and communicate concepts that are often difficult to comprehend for the public, their peers and even themselves.

IMAGE | ABILITY – Visualizing the Unimaginable, will help you enhance your communication and interpersonal skills and provide insight, tips and tricks to make such complex and seemingly unimaginable concepts and ideas imaginable.

After finishing this course you will be more skilled in finding the right visual language to convey your ideas, thoughts and vision. You will be able to illustrate units and quantities, concepts and themes and you will know how to unravel complexity by using diagrams and schemes.

Subject:
Architecture and Design
Material Type:
Full Course
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
Dr.ir. M.C. Stellingwerff
Date Added:
08/01/2018
Acoustic Remote Sensing and Sea Floor Mapping
Conditions of Use:
Remix and Share
Rating

The course treats the following topics: - Relevant physical oceanography - Elements of marine geology (seafloor topography, acoustical properties of sediments and rocks) - Underwater sound propagation (ray acoustics, ocean noise) - Interaction of sound with the seafloor (reflection, scattering) - Principles of sonar (beamforming) - Underwater acoustic mapping systems (single beam echo sounding, multi-beam echo sounding, sidescan sonar) - Data analysis (refraction corrections, digital terrain modelling) - Applications (hydrographic survey planning and navigation, coastal engineering) - Current and future developments.

Subject:
Engineering
Oceanography
Material Type:
Homework/Assignment
Lecture Notes
Reading
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
dr.ir. M. Snellen
Date Added:
02/09/2016
Advanced Device Physics
Conditions of Use:
Remix and Share
Rating

This course will focus for a large part on MOSFET and CMOS, but also on heterojunction BJT, and photonic devices.First non-ideal characteristics of MOSFETs will be discussed, like channel-length modulation and short-channel effects. We will also pay attention to threshold voltage modification by varying the dopant concentration. Further, MOS scaling will be discussed. A combination of an n-channel and p-channel MOSFET is used for CMOS devices that form the basis for current digital technology. The operation of a CMOS inverter will be explained. We will explain in more detail how the transfer characteristics relate to the CMOS design.

Subject:
Electronic Technology
Physics
Material Type:
Activity/Lab
Lecture Notes
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
R.A.C.M.M. van Swaaij
Date Added:
02/20/2016
Advanced Structural Analysis
Conditions of Use:
Remix and Share
Rating

This course is designed to introduce students who wish to specialize in stress analysis of thin-walled structures to more advanced topics such as the analysis of statically indeterminate structures, warping, constraint stresses, shear diffusion, and elements of plate bending.

Subject:
Engineering
Material Type:
Full Course
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
Dr. Mostafa Abdalla
Date Added:
02/07/2014
Advanced Transport Phenomena
Conditions of Use:
Remix and Share
Rating

How can you reduce the energy loss of your home? What is the underlying science of energy loss in pipes? Which heat and mass transfer problems do we have to tackle to make consumer products?

In this engineering course, you will learn about the engineering principles that play an important role in all of these and more phenomena. You will learn about microbalances, radiation, convection, diffusion and more and their applications in everyday life.

This advanced course is for engineers who want to refresh their knowledge, engineering students who are eager to learn more about heat/mass transport and for all who have fun in explaining the science of phenomena in nature.

Subject:
Applied Science
Material Type:
Full Course
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
Peter Hamersma
Robbert Mudde
Date Added:
07/18/2018
Agent Based Modeling of Complex Adaptive Systems (Advanced)
Conditions of Use:
Remix and Share
Rating

Building on Complex Adaptive Systems theory and basic Agent Based Modeling knowledge presented in SPM4530, the Advanced course will focus on the model development process. The students are expected to conceptualize, develop and verify a model during the course, individually or in a group. The modeling tasks will be, as much as possible, based on real life research problems, formulated by various research groups from within and outside the faculty.
Study Goals The main goal of the course is to learn how to form a modeling question, perform a system decomposition, conceptualize and formalize the system elements, implement and verify the simulation and validate an Agent Based Model of a socio-technical system.

Subject:
Computer Science
Material Type:
Full Course
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
Dr. Ir. I. Nikolic
Date Added:
03/03/2016
Agent Based Modeling of Complex Adaptive Systems (Basic)
Conditions of Use:
Remix and Share
Rating

Our human society consists of many intertwined Large Scale Socio-Technical Systems (LSSTS), such as infrastructures, industrial networks, the financial systems etc. Environmental pressures created by these systems on Earth‰ŰŞs carrying capacity are leading to exhaustion of natural resources, loss of habitats and biodiversity, and are causing a resource and climate crisis. To avoid this sustainability crisis, we urgently need to transform our production and consumption patterns. Given that we, as inhabitants of this planet, are part of a complex and integrated global system, where and how should we begin this transformation? And how can we also ensure that our transformation efforts will lead to a sustainable world? LSSTS and the ecosystems that they are embedded in are known to be Complex Adaptive Systems (CAS). According to John Holland CAS are "...a dynamic network of many agents (which may represent cells, species, individuals, firms, nations) acting in parallel, constantly acting and reacting to what the other agents are doing. The control of a CAS tends to be highly dispersed and decentralized. If there is to be any coherent behavior in the system, it will have to to arise from competition and cooperation among the agents themselves. The overall behavior of the system is the result of a huge number of decisions made every moment" by many individual agents. Understanding Complex Adaptive Systems requires tools that themselves are complex to create and understand. Shalizi defines Agent Based Modeling as "An agent is a persistent thing which has some state we find worth representing, and which interacts with other agents, mutually modifying each other‰ŰŞs states. The components of an agent-based model are a collection of agents and their states, the rules governing the interactions of the agents and the environment within which they live." This course will explore the theory of CAS and their main properties. It will also teach you how to work with Agent Based Models in order to model and understand CAS.

Subject:
Engineering
Environmental Science
Material Type:
Assessment
Lecture Notes
Reading
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
Dr. Ir. I. Nikolic; Dr.ir. I. Bouwmans
Date Added:
03/03/2016
Algoritmiek
Conditions of Use:
Remix and Share
Rating

This course treats various methods to design and analyze datastructures and algorithms for a wide range of problems. The most important new datastructure treated is the graph, and the general methods introduced are: greedy algorithms, divide and conquer, dynamic programming and network flow algorithms. These general methods are explained by a number of concrete examples, such as simple scheduling algorithms, Dijkstra, Ford-Fulkerson, minimum spanning tree, closest-pair-of-points, knapsack, and Bellman-Ford. Throughout this course there is significant attention to proving the correctness of the discussed algorithms. All material for this course is in English. The recorded lectures, however, are in Dutch.

Subject:
Engineering
Material Type:
Homework/Assignment
Lecture
Lecture Notes
Reading
Teaching/Learning Strategy
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
M. de Weerdt
Date Added:
03/09/2011
Analog Integrated Circuit Design
Conditions of Use:
Remix and Share
Rating

An introductory course in analog circuit synthesis for microelectronic designers. Topics include: Review of analog design basics; linear and non-linear analog building blocks: harmonic oscillators, (static and dynamic) translinear circuits, wideband amplifiers, filters; physical layout for robust analog circuits; design of voltage sources ranging from simple voltage dividers to high-performance bandgaps, and current source implementations from a single resistor to high-quality references based on negative-feedback structures.

Subject:
Electronic Technology
Material Type:
Assessment
Full Course
Lecture Notes
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Date Added:
02/19/2016
The Basics of Transport Phenomena
Conditions of Use:
Remix and Share
Rating

Have you ever wondered why ventilation helps to cool down your hot chocolate? Do you know why a surfing suit keeps you warm? Why iron feels cold, while wood feels warm at room temperature? Or how air is transferred into aqueous liquids in a water treatment plant? How can we sterilize milk with the least amount of energy? Or how do we design a new cooling tower of a power plant?

Transport Phenomena addresses questions like these and many more, exploring a wide variety of applications ranging from industrial processes to daily life problems and even to bioprocesses in our own body.

In Transport Phenomena, the transport and transfer of momentum, heat and mass are studied. To understand these processes which often take place simultaneously, the underlying concepts will be covered in this course.

Subject:
Applied Science
Material Type:
Full Course
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
Peter Hamersma
Rob Mudde
Date Added:
07/18/2018
Bed, Bank and Shoreline Protection
Conditions of Use:
Remix and Share
Rating

Design of shoreline protection along rivers, canals and the sea; load on bed and shoreline by currents, wind waves and ship motion; stability of elements under current and wave conditions; stability of shore protection elements; design methods, construction methods. Flow: recapitulation of basics from fluid mechanics (flow, turbulence), stability of individual grains (sand, but also rock) in different type of flow conditions (weirs, jets), scour and erosion. Porous Media: basic equation, pressures and velocities on the stability on the boundary layer; groundwater flow with impermeable and semi-impermeable structures; granular filters and geotextiles. Waves: recapitulation of the basics of waves, focus on wave forces on the land-water boundary, specific aspects of ship induced waves, stability of elements under wave action (loose rock, placed blocks, impermeable layers) Design: overview of the various types of protections, construction and maintenance; design requirements, deterministic and probabilistic design; case studies, examples Materials and environment: overview of materials to be used, interaction with the aquatic environment, role of the land-water boundary as part of the ecosystem; environmentally sound shoreline design.

Subject:
Engineering
Material Type:
Full Course
Lecture
Reading
Textbook
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
Ir. H.J. Verhagen
Date Added:
02/22/2016
Bio Inspired Design
Conditions of Use:
Remix and Share
Rating

The course Bio-Inspired Design gives an overview of non-conventional mechanical approaches in nature and shows how this knowledge can lead to more creativity in mechanical design and to better (simpler, smaller, more robust) solutions than with conventional technology. The course discusses a large number of biological organisms with smart constructions, unusual mechanisms or clever sensing and processing methods and presents a number of technical examples and designs of bio-inspired instruments and machines.

Subject:
Architecture and Design
Material Type:
Homework/Assignment
Lecture Notes
Reading
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
Dr.ir. P. Breedveld
Date Added:
10/09/2014
Bio Mechatronics
Conditions of Use:
Remix and Share
Rating

Biomechatronics is a contraction of biomechanics and mechatronics. In this course the function and coordination of the human motion apparatus is the central focus, and the design of assistive devices for the support of the function of the motion apparatus.

Subject:
Engineering
Health, Medicine and Nursing
Material Type:
Full Course
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
D.H. Plettenburg
Date Added:
02/02/2016
Biomedical Engineering Design
Conditions of Use:
Remix and Share
Rating

This course presents a design philosophy and a design approach, dedicated to rehabilitation technology. This field was selected because of human-machine interaction is inherent and vital. Illustrative examples will be discussed by their entire design process

Subject:
Engineering
Health, Medicine and Nursing
Material Type:
Activity/Lab
Assessment
Full Course
Lecture Notes
Reading
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
D.H. Plettenburg
Date Added:
02/03/2016
Breakwaters and Closure Dams
Conditions of Use:
Remix and Share
Rating

Design and construction of breakwaters and closure dams in estuaries and rivers. Functional requirements, determination of boundary conditions, spatial and constructional design and construction aspects of breakwaters and dams consisting of rock, sand and caissons.

Subject:
Engineering
Environmental Science
Material Type:
Assessment
Lecture Notes
Reading
Textbook
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
Ir. H.J. Verhagen
Date Added:
03/03/2016
Buckling of Structures
Conditions of Use:
Remix and Share
Rating

The course is concerned with the concept of structural stability. This concept is applied to discrete and continuous basic structural elements (beams, frames, plates and shells). The fundamental concepts are introduced on the basis of the governing differential equations. The course includes the following topics:

*Equations of motion, nonlinear equilibrium equations, stationary potential energy criterion.
*Stability analysis for the basic structural elements.
*Design methods for stability of basic structural elements.

Subject:
Engineering
Material Type:
Full Course
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
Dr.ir. R. de Breuker
Date Added:
07/30/2018
Business Model Metrics and Advanced Tools
Conditions of Use:
Remix and Share
Rating

Do you want to enhance your business model by creating a clear focus or implement your new business model innovation into your IT?

In this business and management course, we will discuss business model agility and how specific business model metrics will help you focus on the overall goals of our business.

You will also learn about advanced tools to help support the bridge between business model thinking and IT implementation.

Subject:
Engineering
Business and Communication
Material Type:
Full Course
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
Dr.ir. G.A. de Reuver
Dr.ir. T.I. Haaker
Prof.dr. W.A.G.A. Bouwman
Date Added:
07/30/2018
Business Model Testing
Conditions of Use:
Remix and Share
Rating

The world is changing rapidly and full of uncertainties. The future success of a business model depends on how well it is adapted to changing circumstances. Do you want to become aware of the relevant developments in technology, markets and society? And understand how this affects your business?

This business and management course will teach you how to stress test your business model. You will learn how to identify the relevant trends and uncertainties and how they impact your business model. You will analyse the strong and weak parts of your business model and look for opportunities to make your business model more robust and future proof.

You will learn through real-world examples from well-known companies and interact with fellow entrepreneurs. By the end of this course, you will be able to stress test your own business model to analyse its future success.

Subject:
Engineering
Business and Communication
Material Type:
Full Course
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
Dr.ir. G.A. de Reuver
Dr.ir. T.I. Haaker
Prof.dr. W.A.G.A. Bouwman
Date Added:
07/30/2018
Caleidoscoop
Conditions of Use:
Remix and Share
Rating

Tijdens de cursus Caleidoscoop worden verschillende aspecten belicht waarmee de eerstejaarsstudenten worden voorzien van basisvaardigheden en basiskennis die noodzakelijk zijn voor het succesvol volgen van een studie in de wiskunde.

Subject:
Mathematics
Material Type:
Lecture
Lecture Notes
Reading
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
Dr. K.P. Hart
Date Added:
10/09/2014
Cavitation on Ship Propellers
Conditions of Use:
Remix and Share
Rating

Summary: Cavitation is the transition of a fluid into vapour due to local reduction of pressure which is generated by high local flow velocities. The transition of a fluid into vapour also occurs during cooking of water by an increase of the local temperature. The term cavitation is generally reserved for conditions in which the temperature of the bulk fluid is not changed. Although cavitation can occur in many situations this course focuses on ship hydrodynamics and ship propellers. The course is divided into five main groups: physics, types and effects of cavitation as well as calculations and test facilities and techniques. Some of these topics are illustrated with the use of videos. (Study goals:) 1. Reproduce the main lines in a selection of the latest developments in the field of propulsion and resistance hydrodynamics, where the current selection of propulsion and resistance topics includes unsteady hydrodynamics of the flow over a foil, cavitation forms, problems and tools for analysis and design, propulsion systems in a service environment and ship drag reduction by air lubrication. 2. Analyse a hydrodynamic problem in the propulsion and resistance area, into well defined sub problems that can be analysed with state of the art knowledge and tools 3. Select the appropriate theory or tool (either numerical or experimental) for an analysis of the identified problem. 4. Reproduce and present to an audience, the main lines in a contemporary publication from the field of Propulsion and Resistance hydrodynamics. 5. Understand, interpret and react to questions from the audience and the lecturer and in doing so, stimulate the scientific debate.

Subject:
Engineering
Maritime Science
Material Type:
Lecture
Reading
Textbook
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
T.J.C. van Terwisga
Date Added:
02/04/2016